Workswell WIRIS 2nd gen

Thermo 7 188 orez

 
 

  • Workswell WIRIS 2nd gen is currently the most state-of-the-art thermal imaging system designed for commercial unmanned aerial vehicles, so called drones. It is a compact system that combines a thermal camera, a digital camera (set to a visible spectrum), and a processor unit that has possibility to record radiometric data with a digital HDMI output, all in one case.

    Workswell WIRIS 2nd gen is a revolutionary product in its category, mainly due to the real-time control by a standard RC radio transmitter directly on the drone, providing many options. Using one button only, it is possible to remotely save fully radiometric imaging data (single pictures and also videos), to change temperature scale settings, measurement parameters (emissivity and apparent reflected temperature), temperature alarms, etc. The system is unique because of these possibilities.

    Workswell CorePlayer software for measured data analysis, reports creation, etc. is delivered together with the system. Workswell ThermoFormat software is used for batch editing and export of the pictures (for example in order to create 3D models).

    Workswell WIRIS 2nd gen thermal imaging system is being supplied with either 336×256 (WIRIS 336) or 640×512 (WIRIS 640) resolution; you may choose from different objective lenses – see table of lenses.

    Workswell WIRIS 2nd gen
    Since the end of 2016, the second generation of Workswell labelled “WIRIS 2nd gen” has been available. Apart from its temperature range extended up to 1500°C (using a high temperature filter), the second generation of the Workswell WIRIS product offers the following functions:

     

    • SBus
    • CAN bus
    • A faster 10Hz GPS with a jack connector
    • The new TIFF format for storage of images
    • A possibility of controlling the equipment through TCP/IP
    • Real time hours are significantly more accurate now
    • Digital outputs for the autopilot and GPS synchronisation
    • An integrated stabilised source for the RC receiver
    • 4 openings for an easier installation on the gimbal

     

    For this reason, there are currently only 7 digital PWM inputs available (the eight being used for the SBus).

  •  
    Thermal Imaging cameraWorkswell WIRIS 640Workswell WIRIS 336
    Resolution 640 x 512 pixels 336 x 256 pixels
    Temperature range -25°C to +150°C -25°C to +150°C
      -40°C to +550°C -40°C to +550°C
      +1 500°C on request +1 500°C on request
    Temperature sensitivity 50mK (0.05°C)
    30mk (0.03°C) on request
    50mK (0.05°C)
    30mk (0.03°C) on request
    Accuracy ± 2% or ± 2°C ± 2% or ± 2°C
    Spectral range 7.5 – 13.5 μm 7.5 – 13.5 μm
    Calibration Yes Yes
    focus Focused on infinity Focused on infinity
    Digital zoom 1 – 14x continuous 1 – 11x continuous
    Digital camera Yes, 1 600 x 1 200px Yes, 1 600 x 1 200px
    Integrated memory 32GB 32GB